Bottle for testing gas detectors for methane * Saturation of the active substance: 40%LIE * Volume: 12 liters

Base for COFEM NO2 detector

NO2 detector, SDN

Base for addressable SCO/DCO detector

SCO Addressable CO detector with a coverage area of 200 and 300 m2 for ZCO panels, It has the possibility to work as a conventional one by connecting to a conventional MCO control panel, Requires purchase of ZSCO base, Manufactured according to standard EN 50545-1, UNE 23300 certified.

Relay board with 3 outputs * NO-NC 30V/1A * Places in the detector * Allows repetition of ALARM, PRE-ALARM, DETECTOR FAULT (for

Conventional control panel for CO detection, 1 zone with the possibility of up to 10 CO/NO2 detectors, 1 relay output for ventilation, 1 alarm output, (possibility for a version with 2 levels of ventilation on request), battery capacity 2x12V/2 Ah, dimensions 280 x 225 x 105 mm.

Conventional control panel for CO detection 1 zone with the possibility of up to 20 CO/NO2 detectors, MCO120DVBBUL, Cofem

Conventional control panel for gas and CO detection, 1 zone with the possibility of up to 15 detectors, 2 relay outputs for ventilation, 2 alarm outputs, 2 levels of ventilation, battery, capacity 2x12V/2 Ah, dimensions 280 x225 x 105 mm.

ZCO225; Addressable control panel for gas and CO detection, 2 zones with the possibility of a maximum of 25 CO and/or 25 NO detectors per zone, 2 ventilation relay outputs with the possibility of setting a delay of up to 10 min, 2 alarm outputs with the possibility of setting a delay of up to 5 min, 1 output for "Damage", 1 level of ventilation (possibility of two levels of request), accumulator, capacity 2x12V/7 Ah, dimensions 418 x 324 x 120 mm.