SR150
Wireless Siren with strobe light
SR150
Очаква доставка
Wireless Siren with strobe light
- Compatible with MG Series V4.0 and SP series V4.0 when using an RTX3 V1.5
- Built-in transceiver (433MHz or 868MHz)
- 100db wireless siren with integrated strobe light
- Weather-resistant design using a PC/ABS enclosure with UV protection and a silicone coated PCB (-20°C to 50°C / -4°F to 122°F)
- Battery powered only, no need for AC power
- Fast alarm response time (4 seconds)
- 8-hour alarm display (strobe flashes every 4 seconds after bell cut-off)
- Siren presence supervised by control panel
- Panel presence supervised by siren (activates siren and strobe for 5 minutes if communication is lost)
- Triple tamper protection (screw removal, cover removal, and removal from wall)
- Assign up to 4 sirens per control panel
- In-field firmware upgradeable via 307USB
- Siren test mode
- 4-LED signal strength and status display
- Fully powered using three 1.5Vdc type “D” alkaline batteries (included). Not required, but can also be powered using 8-16Vac / 9-20Vdc power supply.
- Dimensions: 24cm x 6cm x 18cm (9.5in x 2.3in x 7 in)