Sabre II is the latest fibre-optic Perimeter Intrusion Detection System (PIDS) from Remsdaq.
Using a continuously monitored and intrinsically safe, fibre optic sensor cable which is sensitive to vibration, flexing and compression, Sabre II systems can protect many forms of physical barrier.
Sabre II is designed for use with Remsdaq’s proprietary fence-mounted (SabreFonic) and buried (SabreLine) sensor cables.
Disturbance of the fibre optic sensor cable is detected in the Sabre II processor and analysed using a microcontroller with digital signal processor (DSP). When a disturbance exceeds pre-set conditions, an alarm will be generated.
Automatic environmental compensation algorithms ensure the highest probability of detection whilst ensuring a minimum of nuisance alarms from natural causes.
Sabre II is factory set to enable rapid installation and commissioning. Application specific set-up parameters can be adjusted in the field using built-in switches and an LED display.
If required, Sabre II can also be configured and adjusted remotely using the integral serial communications ports and optional software tools.
Sabre II is especially useful for integration with third party data collection and alarm management systems. It provides facilities for external alarm threshold adjustment as well as additional input/output for connection of sensors or control devices.

• SABRE II PROTECTS FENCES, GATES, WALLS, ROOFING AND COVERT BURIED APPLICATIONS
• AUTOMATIC ENVIRONMENTAL COMPENSATION MINIMISES NUISANCE ALARMS
• PERFORMANCE IS UNAFFECTED BY LIGHTNING OR OTHER ELECTROMAGNETIC INTERFERENCE
• PROVIDES COST-EFFECTIVE LINEAR PROTECTION FOR ZONES UP TO 2000 METRES IN LENGTH
• EASY TO SET-UP AND INSTALL WITHOUT TEST EQUIPMENT
• OPERATING PARAMETERS CAN BE REMOTELY ADJUSTED USING OPTIONAL SOFTWARE
• INTEGRAL DATA COLLECTION WHEN USED WITH STARWATCH

• IN-BUILT AUDIO ASSESSMENT CAPABILITY

Technical Specifications

• Power Requirement : 11.0 – 14.0V DC @ 300mA.

• Alarm Output Relay: Up to 1A @ 12V DC.

• Ancillary Outputs (Open Collector): Two open collector outputs with a maximum rating of 100mA @ 24V DC.

• Serial Communications Ports:
  • 1 isolated RS232 / RS485 serial port for alarm transmission, remote set-up or diagnostics

• 1 non-isolated RS232 serial port for local high level diagnostics

• Environmental Specification
  • Operating Temperature Range: -10°C to + 70°C
  • Operating Humidity: up to 95% at +40°C non-condensing

• Storage Temperature Range: -40°C to +70°C.

• Electromagnetic Compatibility (EMC)

• Sabre II meets the requirements of EN55022: 1998, EN50082-1: 1998 and Low Voltage Directive 93/68/EEC.