ISD-SMG318LT-F walk-through metal detector, adopting the thermal imagery technology, realizes non- contact temperature measurement. Face detection function of the camera makes an accurate positioning of the measurement. The detector also supports metal detection.   
It is suitable for safety inspection of dangerous goods and is widely used in public occasions and important places, etc.  It is recommended to be used indoor with a windless environment.

• Temperature exception detection
• Linkage for audible alarm
• Uncooled sensor, resolution: 160 x 120
• Supports dual-light fusion image
• Supports visible light and thermal imaging frame over lay
• Detection accuracy: metal in the size like a clip (or 1/2 clip) is detectable on the middle of the detector. Goods like Belt buckle can be excluded. Copper, aluminum, and zinc (over 150 g) , controlled knife, and gun are detectable
• Multi-area alarm: Indicates the metal position on the body. Max. 18 areas
• Dome camera: IP66 Walk-through detector: IP53

Thermal Imaging Features

• Smart Functions: Temperature exception detection
• Linkage for audible alarm
• Linkage of white strobe light alarm
• Uncooled sensor, resolution: 160 x 120
• Supports AGC4.0, DDE, and 3DNR
• Supports dual-light fusion image
• Supports visible light and thermal imaging frame over lay

System Functions:

• Dual-channel, single IP
• Dual-streaming
• PoE power supply
• IP66 protective level
• Operation temperature: 5℃ to 40℃, ＜95% RH Interfaces:
• 10M/100M self-adapting network interface
• Micro SD/Micro SDHC/Micro SDXC card (128G/256G) slot
• 1-ch alarm input/output
• 15 pseudo colors: white, black , red, etc.

 

Visible Light camera:

• 4 MP, 1/2.7 “ CMOS, Max. resolution: 2688×1520@25fps
• Supports low bit rate, low latency and ROI
• Independent settings for day or night condition
• 1-ch audio input/output
• 1-ch 12 VDC power input
• Security verification, such as HTTPS, supports license creating
• Three level of users
• IP address filtering
• user and password authentication

General

• Power supply 110~240VAC，50-60Hz
• Consumption <72W
• Operation temperature and humidity for Speed dome: 5℃ to 40℃, ＜95% RH
• Operation temperature and humidity  for Walk-through detector: -20℃ to 85℃, 99%, RH
• Protective level for Dome camera: IP66
• Protective level for Walk-through detector: IP53
• Metal Detector dimension (without dome camera): 2200 x 850 x 480mm (H x W x D)
• Dome camera dimension 138.3 mm × 138.3 mm × 123.1 mm(H x W x D)
• Package dimension 2270 x 700 x230mm(H x W x D)
• Weight Net weight About 50Kg